Cube 3D printer community
General Category => Cube 3D printer discussion => Topic started by: Sedgesprite on February 13, 2015, 03:08:40 pm
-
I printed PLA no issues, but ABS wouldn't go. Filament error message. Okay, I found the problem. In Cube Software in the settings I select "PLA and ABS" and then can print the model in either material. (Firmware v. 2.08, using PC with Windows 7).
-
Abs prints at a higher temperature than pla. Worthwhile noting if you're not using standard cube software / cube files.