Author Topic: Repairing and Upgrading Cube Gen2  (Read 602 times)

spegelius

  • Jr. Member
  • **
  • Posts: 51
    • View Profile
Re: Repairing and Upgrading Cube Gen2
« on: April 28, 2016, 12:17:08 am »
Hmm, i din't have such problems when my Cube was in it's default form, every print with Cube's own filament went fine. But with bulk filament and after i've been modifying the nozzle, there have been more than enough filament jams, which seem to have been sorted out now. Also I'm now changing my hot-end to j-head, but that requires some additional work (regulating 24V-> 12V and adjusting the thermistor value (100k) to match what Cube's motherboard expects it to be (200k) ).

But Cube in it's default form shouldn't have problems printing small details. What you described seems to point to the nozzle heating too much. Maybe the thermistor was damaged when the fan died and nozzle overheated? What settings did you use with the print?