Author Topic: FrankenCube v0.1 Its ALIVE!!!  (Read 6979 times)

fritshgl

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: FrankenCube v0.1 Its ALIVE!!!
« Reply #30 on: June 17, 2015, 01:57:07 pm »
Hi Joop,
I would suggest you try printing with PLA at 200 C.
Layer height 0.2 mm and printing speed 30 mm/s.
Could be that the heat capacity of the extruder is to low for 230 C.

Frits